Coiled Extension Cord

• Allows you to keep the saw's cord tied up and out of your way.
• Made for use with 1000 & 2000 Series saws.

Dust Containment Brush

• Allows you to keep the saw's cord tied up and out of your way.


• Made for use with 1000 & 2000 Series saws.

• Dust Brush under the saw plate will channel saw dust up into the dust hose.
• Brush keeps debris knocked down when rip cutting.

Brush, 12′ Hose and Coupler for Classic Models

• Dust Brush under the saw plate will channel saw dust up into the dust hose.


• Brush keeps debris knocked down when rip cutting.

• Dust Brush surrounds saw blade under saw insert so vacuum draws out suspended dust
• Coupler for 2.5 connects right to your Shop Vac-type and industrial vacuums (NFPA 664 Approved Vacuum) with 2.5” hoses
• A 12 foot long, 2.5 inch dust hose is included

Frame Dust Collection

• Dust Brush surrounds saw blade under saw insert so vacuum draws out suspended dust


• Coupler for 2.5 connects right to your Shop Vac-type and industrial vacuums (NFPA 664 Approved Vacuum) with 2.5” hoses


• A 12 foot long, 2.5 inch dust hose is included

If dust collection is an issue in your shop, this is something you need to get. The bottom of the frame includes an additional port.  As the dust falls down to the bottom, the additional port draws dust away. Includes 4 inch Port, Adapter, & Additional dust guards (4 inch hose or vacuum not included.)

Floating Router Plate

If dust collection is an issue in your shop, this is something you need to get. The bottom of the frame includes an additional port.  As the dust falls down to the bottom, the additional port draws dust away. Includes 4 inch Port, Adapter, & Additional dust guards (4 inch hose or vacuum not included.)

• Floating platform generates uniform dados even on bowed or twisted material.
• Perfect for V grooving ACM Panels! Make your own dimensional displays and architectural elements!
• Fits on all current Saw Trax models.
• Universal design accommodates most router motors.
• This set up allow the router to follow the contours of the sheet, giving consistent dado even on bowed or warped material.
• Router not included.

Knife Cutter

Knife Cutter

• The Pivoting Knife Cutter Plate is used to cut or score Sintra, Expanded PVC, Coroplast, Gator Foam, Cardboard, and Foam Board.
• Knife can RIP and cross cut.
• Uses OLFA^® Knife with “snap to sharpen” blades.
• Switch from Circular saw to knife insert in seconds!

ACM Cutter Insert

• The Pivoting Knife Cutter Plate is used to cut or score Sintra, Expanded PVC, Coroplast, Gator Foam, Cardboard, and Foam Board.


• Knife can RIP and cross cut.


• Uses OLFA^® Knife with “snap to sharpen” blades.


• Switch from Circular saw to knife insert in seconds!

• Dust free cutting system.
• Cuts 3 mm Aluminum Composite material such as Dibond, maxmetal, Omega Board, epanel , polymetal and more! .
• Two opposing circular cutters pinch the material forcing it to split.
• Cuts are rounded so there are no sharp edges.

Glass Scoring Insert

• Dust free cutting system.


• Cuts 3 mm Aluminum Composite material such as Dibond, maxmetal, Omega Board, epanel , polymetal and more! .


• Two opposing circular cutters pinch the material forcing it to split.


• Cuts are rounded so there are no sharp edges.

The Glass Scoring Plate is used to score glass & mirrors so that it may easily be snapped to size.

60T Premium Plastics Blade

The Glass Scoring Plate is used to score glass & mirrors so that it may easily be snapped to size.

Perfect for plastics such as Sintra, Lexan, & Styrene. Smooth, clean and melt-free cuts on most plastics.

60T Premium Aluminum Blade

Perfect for plastics such as Sintra, Lexan, & Styrene. Smooth, clean and melt-free cuts on most plastics.

Perfect for non-ferrous metals such as aluminum, copper, brass, and bronze. Works well for plywood and other timbers.

Laser Guide

Perfect for non-ferrous metals such as aluminum, copper, brass, and bronze. Works well for plywood and other timbers.

• Set to illuminate cut line of your circular saw or knife cutter insert.
• Great for trimming prints in the sign industry.
• Uses standard batteries found locally.

Measuring Tapes

• Set to illuminate cut line of your circular saw or knife cutter insert.


• Great for trimming prints in the sign industry.


• Uses standard batteries found locally.

• Self-Adhesive metal tape.
• Can be applied to left or right side of the machine.
• Can be used on lower fence or mid-fence.

Flip Stop System

Available in two sizes: 56" FSTP56 or 96" FSTP96

• Perfect for use with longer sheets or where cutting exact lengths repetitively.
• Can be placed on either the right or left side of machine.
• Includes specialized aluminum extrusion, tape and two adjustable stops.
• Available in 56″ or 96″ lengths.
• When ordering, please specify size: 56" FSTP56 or 96" FSTP96

Dual Rip Gauge

DRGS52 for 52" cross cut machine, DRGS64 for 64" cross cut machine, DRGS76 for 76" cross cut machine

• Pointers and measuring tape included in this item.
• For fast and easy rip cuts.
• Use the pointer to set rip measurement.
• An upper and lower pointer can be used to set rip widths from either direction.
• A lower spring maintains tape measure tension.
• Please specify cross cut of your machine, 52", 64" or 76" so the correct backing can be sent.

Stop Bar with Strip

• Pointers and measuring tape included in this item.


• For fast and easy rip cuts.


• Use the pointer to set rip measurement.


• An upper and lower pointer can be used to set rip widths from either direction.


• A lower spring maintains tape measure tension.


• Please specify cross cut of your machine, 52", 64" or 76" so the correct backing can be sent.

• For fast, repetitive cuts.
• Strip support allows you to make cuts less than 1 inch wide.
• Can be placed on right or left lower fence or mid fence.

Spinning Saw Insert Plate: Change the Saw, Not the Saw Blade – and Save Time!

• For fast, repetitive cuts.


• Strip support allows you to make cuts less than 1 inch wide.


• Can be placed on right or left lower fence or mid fence.

• Have dedicated saw with material blade for different materials, faster to change the saw than the saw blade.
• Allows user to quickly switch from cross cut to rip cut without removing saw plate
• Dust collection cover and dust brush included
• Makita saw included on 1000 and Sign maker’s series panel saws
• Makita 5377 Hypoid Drive included on 2000 series panel saws
• Milwaukee 6470 10.25″ saw included on 3000 series panel saws

Steel Bearings

• Have dedicated saw with material blade for different materials, faster to change the saw than the saw blade.


• Allows user to quickly switch from cross cut to rip cut without removing saw plate


• Dust collection cover and dust brush included


• Makita saw included on 1000 and Sign maker’s series panel saws


• Makita 5377 Hypoid Drive included on 2000 series panel saws


• Milwaukee 6470 10.25″ saw included on 3000 series panel saws

• Accu-Glide patented steel bearing system
• 12 sealed bearings for easy and precise movement.
• Included on all Saw Trax models.

Universal Saw Insert Plate

• Accu-Glide patented steel bearing system


• 12 sealed bearings for easy and precise movement.


• Included on all Saw Trax models.

• This universal plate will accommodate most 7 ¼ inch saws.
• Switch from cross to rip cut by removing & rotating the plate, then reinserting it into the carriage.
• Included on Basic and Panel Saw Kits.

Universal Carriage System

• This universal plate will accommodate most 7 ¼ inch saws.


• Switch from cross to rip cut by removing & rotating the plate, then reinserting it into the carriage.


• Included on Basic and Panel Saw Kits.

• Quick release system
• Universal Carriage can be fitted with a standard saw plate, spinning saw insert plate, knife cutter plate, ACM cutter plate or floating router plate.
• Change plates in approximately eight seconds.
• Included on all Saw Trax Models.

Mid Fence

• Quick release system


• Universal Carriage can be fitted with a standard saw plate, spinning saw insert plate, knife cutter plate, ACM cutter plate or floating router plate.


• Change plates in approximately eight seconds.


• Included on all Saw Trax Models.

Fully adjustable and sold as a pair (left side and right side) the Mid Fence adds a 28" detachable shelf to each side for material support at waist height to your panel saw.

• Prevent back strain by cutting smaller pieces at waist level.
• All steel construction – No warping or splintering!
• Shelf is easily removable for cutting larger sheets

Builder’s Extension

Fully adjustable and sold as a pair (left side and right side) the Mid Fence adds a 28" detachable shelf to each side for material support at waist height to your panel saw.

• Prevent back strain by cutting smaller pieces at waist level.


• All steel construction – No warping or splintering!


• Shelf is easily removable for cutting larger sheets

• Set includes two 28″ fence extensions (also available in 56″)
• Extends Compact wheel base to 10 feet
• Easily removed for storage or transport
• Perfect for taking to the job site with a Compact frame panel saw
• Model BLEXT fits all models except 2000 and 3000 series
• Model BLXTSS (Steel Sleeves) only fits 2000 and 3000 series

Builder’s Extension with Steel Roller Sleeves

• Set includes two 28″ fence extensions (also available in 56″)


• Extends Compact wheel base to 10 feet


• Easily removed for storage or transport


• Perfect for taking to the job site with a Compact frame panel saw


• Model BLEXT fits all models except 2000 and 3000 series


• Model BLXTSS (Steel Sleeves) only fits 2000 and 3000 series

• Set includes two 28″ fence extensions (also available in 56″)
• Extends Compact wheel base to 10 feet
• Easily removed for storage or transport
• Perfect for taking to the job site with a Compact frame panel saw
• Model BLXTSS (Steel Sleeves) only fits 2000 and 3000 series

Sheet Clamp

• Set includes two 28″ fence extensions (also available in 56″)


• Extends Compact wheel base to 10 feet


• Easily removed for storage or transport


• Perfect for taking to the job site with a Compact frame panel saw


• Model BLXTSS (Steel Sleeves) only fits 2000 and 3000 series

• Holds material under carriage so you don’t have to.
• Especially handy with cutting long narrow pieces on the material rollers or long  pieces on the mid fence.
• A magnet is used to hold it open and a different magnetic strip holds it onto the center pan.
• Easily removable when rip cutting.
• NOW 4 feet in length!

Spring Hold Down

• Holds material under carriage so you don’t have to.


• Especially handy with cutting long narrow pieces on the material rollers or long  pieces on the mid fence.


• A magnet is used to hold it open and a different magnetic strip holds it onto the center pan.


• Easily removable when rip cutting.


• NOW 4 feet in length!

• Holds thinner materials against frame for more material support.
• Recommended for materials 1/4″ or less.
• Does not have to be removed when cutting thicker materials.

Steel Sleeved Material Rollers

• Holds thinner materials against frame for more material support.


• Recommended for materials 1/4″ or less.


• Does not have to be removed when cutting thicker materials.

• Recommended for high production facilities and steel fabricators
• Makes material rollers virtually unbreakable
• Steel sleeves fit over our traditional material rollers