2064 Comparison Chart

Competition does not have a 52″ or 76″ version available.

Saw Trax Competition
Bearings on Carriage Steel Sealed Bearings, 12 per carriage, tighter tolerances, easier movement 8 U-Bolt with nylon washers
Alignment System Patented Accu-Square system; Set & forget; Never needs adjustment. No alignment system;
13 alignment adjustments
Saw Replacement Off the shelf;
Limited down time
Proprietary – Must be
replaced through Manufacturer
Carriage Locks 2 1 – Not as secure as 2 when rip cutting
Router Insert Plate option? Yes, Floating Router Capable No
Razor Knife Insert option? Yes, Uses OLFA Segmented Knife No
ACM Rolling Shear Option? Yes, Dust free cuts with rounded edges No
Glass Cutter option? Yes, score cut No
Instructions Instructional CD video plays in computer and manual Manual only
Retraction Cable Off-set Can pull when feeding
material from side
Blade Viewing Port Yes No
Material Rollers 18
Never need adjustment
(12, can go out of alignment)
Other Cross Cutting
Models Available
Yes, 2052 (52”) and 2076 (76”) No, only 64″ Cross Cut
Blade 7 ¼” – Found everywhere 8” – Hard to find
Depth of Cut 1.75″ 1.75″
Saw 15 Amp Hypoid Drive
No gear oil to change
13 Amp Worm Drive
Must change gear oil after 1st 10 hours
Material Rollers Steel-Sleeved Aluminum
Folding Stand Standard;
Folds like a ladder;
Takes one person to move
$188, Fixed; User must attach;
Can’t get through standard door
Wheels Standard, 5” $79, User must Attach, 4”
Rip Gauge Standard Standard
Stop Bar & Tapes Standard, Includes Strip Bar $349, User Must Attach
Rotating Carriage Standard Standard
Dust Collection Standard, Dust Brush around blade,
Saw Dust Cover, larger diameter 12’ hose and coupler.
$289, Dust Kit only, Adjustable Vinyl Tube for saw blade,
24 tooth blade Standard Saw Blade Not Included ($83)
Total $5,299.00* $6,587.00*
Copyright © 2023 | Saw Trax Manufacturing, Inc. AMP Design & Marketing by Atlanta SEO