Saw Trax Scoop Dolly in Atlanta Georgia

What was needed was a way to tilt back a bulky wide object and then move it in any direction so that the path required for movement is minimized. This is not a new concept but what is new with the Saw Trax Scoop Dolly is that the scoop mechanism is able to pivot on the side of the dolly instead of trying to pivot the entire transport device. The pivoting scoop mechanism allows for loads to be loaded and unloaded faster and easier. The degree of tilt on the Scoop Dolly can be varied by moving the scoop support posts forward or backward to keep the center of gravity of a very tall or short object over the dolly.

Learn More

Saw Trax Manufacturing, Inc. | Atlanta

{{if_date_enable_dsg1_mdf}}

Updated:

{{ifend_date_enable_dsg1_mdf}} {{if_date_enable_dsg1_pub}}

Published:

{{ifend_date_enable_dsg1_pub}}

Saw Trax Scoop Dolly in Atlanta GA

The dimensions make them awkward to move with a forklift. The inventor, Michael Della Polla, says they are safer than using a forklift because in the past, one person had to be on the end to stabilize the crates while being loaded. If the forklift driver's foot were to slip off the brake while loading a crate into the truck, the stabilizing person could get crushed. Besides being faster and safer, it is more productive and cheaper in the long run than using a forklift. You can work faster than with a fork lift and don't have the fuel costs or wear and tear on the forklift. Learn More

Saw Trax Manufacturing, Inc. | Atlanta

{{if_date_enable_dsg2_mdf}}

Updated:

{{ifend_date_enable_dsg2_mdf}} {{if_date_enable_dsg2_pub}}

Published:

{{ifend_date_enable_dsg2_pub}}

Saw Trax Scoop Dolly in Atlanta GA

The dimensions make them awkward to move with a forklift. The inventor, Michael Della Polla, says they are safer than using a forklift because in the past, one person had to be on the end to stabilize the crates while being loaded. If the forklift driver's foot were to slip off the brake while loading a crate into the truck, the stabilizing person could get crushed. Besides being faster and safer, it is more productive and cheaper in the long run than using a forklift. You can work faster than with a fork lift and don't have the fuel costs or wear and tear on the forklift. Learn More

Learn More

A wheel kit of 5 wheels can be added to the dolly for movement over dock transitions and onto trucks of differing heights. This consists of 2 front and 2 back wheels that mount to the front side and back side of the dolly and one wheel that is centered under the dolly that allows the loaded dolly to breeze over loading dock transitions. The dolly was originally designed to move the tall, wide top heavy panel saw crates onto freight trucks. These vertical panel saw crates can be over 7 feet tall, 10.5 feet wide and 12 inches deep.

Saw Trax Manufacturing, Inc. Vertical Panel Saws Atlanta

{{if_date_enable_dsg3_mdf}}

Updated:

{{ifend_date_enable_dsg3_mdf}} {{if_date_enable_dsg3_pub}}

Published:

{{ifend_date_enable_dsg3_pub}}
,

BEST Saw Trax Scoop Dolly in Atlanta GA