Saw Trax Review in Atlanta Georgia

What I wanted was a dependable, accurate saw that would safely take the heavy lifting out of making square cuts in 4x8 and 5x5 sheet goods, and cut dadoes for cabinet construction. Before making the investment, I made careful comparisons, both on-line and at a big annual woodworking show, talking to various manufacturers’ reps along the way. When I called customer service at Saw Trax, questions were always courteously, promptly answered.

Learn More

Saw Trax Manufacturing, Inc. | Atlanta

Saw Trax Review in Atlanta GA

9. The wooden box I made to fit over most of the exposed circular saw simply slips on and off as desired. I attached a salvaged piece of thin metal to the base plate, left of the saw, to stabilize the box. It has dramatically cut down saw noise, and the sawdust gets gulped up by the shop vac hose or drops to the floor, where much of it is caught by my dust collector. No more sawdust in the face. Learn More

Saw Trax Manufacturing, Inc. | Atlanta

Saw Trax Review in Atlanta GA

9. The wooden box I made to fit over most of the exposed circular saw simply slips on and off as desired. I attached a salvaged piece of thin metal to the base plate, left of the saw, to stabilize the box. It has dramatically cut down saw noise, and the sawdust gets gulped up by the shop vac hose or drops to the floor, where much of it is caught by my dust collector. No more sawdust in the face. Learn More

Learn More

2. Carefully following printed instructions does lead to a square cutting saw or router assembly. When I lay a square on a completed cut, it really tickles me to see such precision. Recently I shoved the saw frame closer to the wall. It stayed "in square". I placed bumpers under the end supports and marked the concrete so I could tell if the saw is ever accidentally bumped out of position.

Saw Trax Manufacturing, Inc. Vertical Panel Saws Atlanta

,

BEST Saw Trax Review in Atlanta GA