There are many different materials people use, from OSB to plywood, from acrylic to PVC, from hardwood to solid surface, and more. If you will be using several different materials, you want a machine that is flexible for your needs. Saw Trax uses a quick release carriage (change it in 8 seconds!) that allows for different tool inserts to be used. Different cutting tools are available, such as a router insert that accepts many standard routers, a pivoting knife insert for dry wall or foam materials, a glass cutter or a rolling shear. These options are not available in competitors’ standard machines. Some Saw Trax customers buy a second saw instead of changing saw blades for different materials (aluminum and acrylic) or a steel cutting saw turning the panel saw into a steel sheer.
Saw Trax Manufacturing, Inc. | Atlanta
Updated:
{{ifend_date_enable_dsg1_mdf}} {{if_date_enable_dsg1_pub}}Published:
{{ifend_date_enable_dsg1_pub}}With so many different materials, such as cement board, and the chemicals in some substrates, air-borne particulates become an important concern. At Saw Trax, we have the dust brush surrounding the saw blade under the insert with a 2.5″ hose attached to the dust bonnet, which can be attached to a standard Shop Vac for extraction of the suspended particulate. Our design also keeps the hose away from the saw, which sounds obvious, but not everybody does it! Learn More
Saw Trax Manufacturing, Inc. | Atlanta
{{if_date_enable_dsg2_mdf}}Updated:
{{ifend_date_enable_dsg2_mdf}} {{if_date_enable_dsg2_pub}}Published:
{{ifend_date_enable_dsg2_pub}}With so many different materials, such as cement board, and the chemicals in some substrates, air-borne particulates become an important concern. At Saw Trax, we have the dust brush surrounding the saw blade under the insert with a 2.5″ hose attached to the dust bonnet, which can be attached to a standard Shop Vac for extraction of the suspended particulate. Our design also keeps the hose away from the saw, which sounds obvious, but not everybody does it! Learn More
For square cuts, guide tube alignment with the material rollers and roller alignment is critical. Saw Trax has a patented “set it and forget it” alignment system called Accu-Square, which ensures square cuts for the life of the panel saw. The rollers are not adjustable so there is only one adjustment for squaring vs. 13 on other panel saws. Make sure to keep this in mind as you compare panel saw systems.
Saw Trax Manufacturing, Inc. Vertical Panel Saws Atlanta
Updated:
{{ifend_date_enable_dsg3_mdf}} {{if_date_enable_dsg3_pub}}Published:
{{ifend_date_enable_dsg3_pub}}