Sign Makers Panel Saw and Mat Cutter Combo Machines

Sign shops cut a variety of materials from MDO board, plastics, thin sheets of aluminum, Dibond,®, Foam-cor®,  Sintra PVC, acrylics, Gatorfoam®, Lexan, plastics, Nu-Alum®, White Wood Smooth, AlumaCorr™, Poly-Metal, SIGNABOND, DIBOND, GATORFOAM, SINTRA, Coroplast®, COREX, more materials. Cut them all with our one machine! We created our Sign Maker's Panel Saws to fit your specialized needs. You no longer need to buy a panel saw and a mat cutter: you can have both in one machine.

Why are these machines ideal for the Sign making industry? The Saw PorterCable-Saw can be used to cut rigid materials. The Knife cutter Knife can be used to cut softer materials quitely and cleanly like corogated plastics, foam boards and other material that can be cut by a knife in one pass.

These machines can cut all Sign materials up to 1.75" in both directions, veritically and horizontally with saw or knife. Compared to Mat Cutters that only cut some materials in limited thicknesses in only one direction, they don't restrict what you can use, or what size blank you can make.

Read a review http://www.nxtbook.com/nxtbooks/sb/sbi1008/#/112/OnePage

 

Compact models come in two sizes, 52" and 64" cross cuts. These models are perfect for space restriced shops or if portability is needed. They have the same cutting capabilities as the Full Size models. Because of the size frame, they can be moved easily but their limitation is they don't fully support material to be cut as the Full Size frames do. The Compact model is shown with an optional mid fence.
Compact-Machines
Full Size machines handle full size sheets with no problem or the "teetering" that can occur with the compact machines. The Full Size 64 shown can easily handle a 5 by 10 foot sheet. It uses 18 material support rollers that glide your material into place to be cut. This model is available in 52", 64", 76", 88", and 100" cross cuts. The Full Size model is shown with an optional Mid Fence.

FullSize64

 

New 2.2 Meter Panel Saw with 220 Volt Bosch GKS 65 Saw, click on pictures to go to page and watch video.

2.2 Mtr-1 2.2 Mtr-2 2.2 Mtr-3

Click on picture Click on picture. Click on picture
Advantages

Bearings

  • Accu-Glide sealed bearing system provides an easy and precise carriage pull


Knife Cutter

  • Does not require backer board.
  • Our knife cross cuts and RIP cuts.
  • Knife blade retracts for safe removal

3 h. p. 15 amp. Porter Cable saw

  • Carbide Tip saw blade
  • Able to view saw blade, align with cut mark
  • Saw Blade is guarded when saw is off machine
  • Uses low cost 7¼" saw blades, found everywhere
  • Tool-less saw blade changes
  • Blade/arbor lock for easy saw blade changes
  • Able to score material by changing the depth of  cut of saw blade.
  • Able to bevel cut material by changing blade angle

Dust Hook up , Hose and Dust Brush

Folding Stand/Wheels

  • Our folding stand folds from the front like a ladder.
  • Our folding stand only needs one person to fold not two people.
  • Our folding stand has no holes to align or pins to drop or lose.
  • Our stand comes with wheels for the frame for easy movement.
  • Our stand is more than a couple pieces of angle iron "U" bolted to a frame.
  • Our frame wheels are larger 5" wheels for easy movement and are notsupporting the machine while it is in use, so our panel saw won't roll away on you.

Spring Hold Down for holding thin sheets in place

Stop, Bar and Measuring Tapes

Dual Rip Gauge Pointers and Tapes

Steel Guide Tubes uses Knickle Chrome plating, not zinc plating as in other types of panel saws.

Package inculdes; Accu-Square Alignment System, Sealed Roller Bearings, Powder Coated Frame, Blade Guard, Trigger Lock, 20 tooth Carbide Tipped Blade, Chip Deflector, Retraction Mechanism, Saw Cord Holder, 2 Carriage Locks, Strip Support, Nickel Chrome Plated Guide Tubes, Dust Port, Dust Hose, Dust Shroud Brush, Folding Stand & Wheels, Stop, Bar & Measuring Tapes, Spring Hold Down, OLFA Knife Cutter Insert, Dual Rip Gauge, 15 amp Porter Cable saw,    40 tooth saw blade   

Click above for Saw Trax Video showing  cutting Dibond, Sintra, Foam board, Coroplast, Lexan, acrlics and saw/knife change in just seconds. 

Click here for link to COMPACT 52 comparison charts.
Click here for link to FULL SIZE 64 comparison charts.

USSC 08 Testimonial

ISA O8 Testimonial l .. ISA O8 Testimonial 2

 

 Home Page 

Saw Trax Mfg. Inc.       888-SAW-TRAX       770-974-0021       fax 770-975-1618       email