3000 Series of Heavy Duty Panel Saws

3000 Series of Heavy Duty Panel Saws.  Comes standard with new Accu-Glide sealed roller bearing system, a folding stand, wheels for the frame, dual rip gauges, carbide saw blade,  a stop and tape, a Milwaukee 15 amp. saw, steel sleeved rollers, a spinning saw insert and a dust collection upgrade and full size frame.

This saw uses 10" blades, the most common blade used in cabinet shops for their table saws and radial arm saws.  It will save the cost of buying expensive specialty blades for cutting veneers, melamine and other difficult to cut materials.

This saw can cut 2 7/8" deep with the dust brush removed or 21/2" deep with the dust brush in place.  It is perfect for trimming doors or other thick stock where a long cross cut or rip cut is needed.

The saw motor is taken off it's original shoe and mounted to our shoe using the saw's mounting screws, a motor support bracket/clamp and a handle support bracket.  It uses the dust port in the rear of the saw for dust extraction with a dust shield and hose attaching plate. 
Will not bevel cut or score cut.

The only upgrade or option not included with this machine is the Mid Fence, Spring hold downs and the floating router plate.

Available in 50, 62 and 74 inch cross cut  models. 
View 3000 Panel Saw Cutting
Melamine
Med Def, High Def

STANDARD EQUIPMENT

15 amp. Industrial Milwaukee Saw Motor
Dust Port Hook Up With Hose hook up
2.5 Dust Hose with Coupler for Shop Vac®
Blade Lock for Easy Saw Blade Changes
10' Steel Frame, Powder Coat Finish
Nickel Chrome 1/8" Wall 1 ¾" Steel Guide Tubes
Accu-Glide Sealed Roller Bearings System
Detachable Tool Plate
18 Injected Molded Plastic Material Rollers Covered With 18 .120 Steel Wall sleeves
Spring Loaded Saw Counter Balance
Saw Cord Holder
2 Carriage Locks
Folding Stand with Wheels
Stop, Bar & Tape
Dust Port Hose  with 12 ft. 2½" hose and coupler
Dual Rip Gauge
Rotating Saw Carriage Insert
Dust Brush
New Accu-Square™ Alignment System


OPTIONS

Spring Hold Down
Mid Fence
Floating Router Insert Plate

FEATURES

50", 62", 74" , 86" or 98" Cross Cut
Rip Cut Either Direction
.0156"  Accuracy
Can use Router in Same Carriage
2 Carriage locks ensure  no play when ripping
Able To View Saw Blade and mark on Material
The most Material Support Rollers in its class
1 Simple Squaring Adjustment, Lock in Place
Uses Standard 10" Blade, (Found Everywhere)
2.5" Depth of Cut, Max 2.875

Steel sleeve, plastic wheel and steel hub.  The material roller system used on the 2000 and 3000 series machines are practically indestructible.

Dust collection over exhaust port of saw.  Spinning insert allows changes from cross cut to rip cut without removing saw from carriage.

Next Page   Home Page   Panel Saws   Panel Routers  Saw / Router Tables
Video Clips   Accessories   Sign Shop  Wood Shop  Builders   Dealers  Charts Comparison  Prices  Specials  Why Buy?   What's New?   Features
Customer Comments 

1-888-SAW-TRAX      1-888-729-8729     (770) 974-0021      FAX (770) 975-1618      info@sawtrax.com