2000 Series of Heavy Duty Panel Saws
15 amp. Skill Worm Drive Saw
Accu-Glide Sealed Bearings
Steel Sleeve over Roller and Hub
2000 Series of panel saws are used when you have guerillas working in the back that have a tendency to break things. We like to say it's bullet proof.
This machine is for heavy duty use, cutting 50 or more sheets a week. A 15 amp. Bosch worm drive saw is put in our shoe so dust collection can be attached. Because of this, it will not bevel or score cut.
It comes with the upgrade package of the 1000 series and adds a spinning saw insert, dust upgrade, a Bosch worm drive saw and steel sleeves over the rollers. Cross cut sizes are 52", 64", 76", 88", and 100".
Shipped assembled.
| Standard Equipment | Features | Optional Equipment |
|---|---|---|
| 15 Amp Bosch Worm Drive Saw | 52", 64", 76", 88", and 100" cross cut | Mid Fence |
2.5" Dust Port, Dust Brush, 2.5"-Dust Hose |
Rip Cut in Either Direction, unlimited | Floating Router Insert |
| Blade lock, easy saw blade change | .0156 Accuracy on cross cut | Spring hold downs |
| Carbide Tipped 20 tooth blade | Can use router in same carriage | Knife Cutter |
| 10' steel powder coated frame | 1.75" depth of cut | Frame Dust Upgrade |
| Nickle Chrome 1/8" wall steel guide tubes, 1.75" OD | 2 carriage locks ensures no play when ripping | 60 tooth carbid tipped aluminum blade 60 tooth carbid tipped plastics blade 40 tooth carbid tipped wood blade |
| Detachable tool plate | Score cut, vary depth of cut | Laser Pointer |
| 18 Injected Molded plastic maertial rollers with steel hubs and steel sleeves | Easy tool insert changes | |
| Spring loaded counter balance | 18 material support rollers, most in class | |
| Saw cord holder | 1 simple squaring adjustment that locks in place, (rollers don't adjust), doesn't go out of square, factory aligned | |
| 2 carriage locks | Uses 7.25 saw blades found everywhere | |
| Dust hose channel | ||
| Folding stand with wheels for frame | ||
| stop, strip bar and left / right tapes | ||
| Dual rip pointers |
|
|
| Accu-Square alignment System | ||
| Accu-Glide Steel Sealed Bearings | ||
| Spinning Saw Insert | ||
| Steel Sleeved Rollers |
|
Saw Trax |
Competition |
|
Heavy Duty Plus Series |
6400 |
Bearings on Carriage |
Steel Sealed Bearings, 12 per carriage Tighter tolerances, easier movement |
U-Bolt with nylon washers, 8 per carriage |
Alignment System |
Patented Accu-Square System |
No Alignment System |
Saw Replacement |
Off the Shelf |
Proprietary - Must be |
Carriage Locks |
2 |
1 - Not as secure as 2 when rip cutting |
Shipping |
Crated |
5 lbs of protective packaging, |
Instructions |
Instructional CD Video plays in computer and Manual |
Manual only |
Router Insert Plate |
Yes, Floating Router Capable |
NO |
Razor Knife Insert |
Yes, Uses OLFA Segmented Knife |
NO |
Guide Tubes |
Nickel Chromed |
Nickel Chromed |
Retraction Cable |
Off-set |
Can pull when feeding |
Blade Change |
Less than a minute |
Take saw apart |
Material Rollers |
18 |
14 |
Cross & Rip Cut |
64” Cross Cut/Unlimited Rip |
64” Cross Cut/Unlimited Rip |
Blade |
7 ¼” - Found Everywhere |
8 ” - Hard to find |
Depth of Cut |
1.75” |
1.75 |
Saw |
15 Amp Worm Drive |
13 Amp Worm Drive |
Material Rollers |
Steel-Sleeved |
Aluminum |
Standard Package |
$3659.00 |
$3729.00 |
|
|
|
Folding Stand |
Standard |
Fixed |
Wheels |
Standard |
$50.00 |
Dual Rip Gauge |
Standard |
Standard |
Stop Bar & Tapes |
Standard |
$239.00 |
Rotating Carriage |
Standard |
Standard |
Dust Collection |
Standard |
Dust Kit Only |
Saw tooth blade |
40 tooth |
Not Included – ($113 for 48 Tooth) |
Total |
$3659.00* |
$4537.00* |
*Pricing as of . |
11/20/08 |
I purchased your series 2000 Panel Saw a few months ago. I have been thoroughly thrilled with the saw. I personally have a bad back which prevents me from llifting heavy objects, thus my old days of lifting heavy sheet material onto my table saw or using my circular saw on the floor are long gone. I have been very impressed with the construction, and ease of use this panel saw offers. What WAS a ten to thirty minute project to cut a piece of sheet material can now be accomplished in a couple of minutes with very minimal lifting required. I have also had the opportunity to speak with Mike at SawTrax and found he and his staff to be very positive and extremely helpful with small issues that were created by my own ignorance. I would highly recommend your SawTrax panel saw to anyone interested in quality equipment that will significantly reduce time and muscle power to accomplish cutting of heavy awkward sheet material, with excellent accuracy. Thank you!
Ray Sweeney