1000 Series of Heavy Duty Panel Saws
Now with spinning insert and new Makita 5007N, Dust hood with 2.5" hose 12 ft. long
Accu-Glide Sealed Bearings
1000 Series of panel saws feature many of the upgrades requested by our customers who's machine saw in constant use.
They come with the Accu-Glide sealed bearing system, a folding stand, wheels for the frame, a stop with strip bar, left / right measuring tapes, dual rip pointers, a 15 amp. Makita 5007NK saw, a dust brush under the carriage for saw dust containment and a saw motor hold down bracket. Cross cut sizes are 52", 64", 76", 88", and 100".
Shipped assembled.
| Standard Equipment | Features | Optional Equipment |
|---|---|---|
| Makita 5007NK Saw Motor | 52", 64", 76", 88", and 100" cross cut | Mid Fence |
| Dust Port, Dust Brush, Dust Hose | Rip Cut in Either Direction, unlimited | Floating Router Insert |
| Blade lock, easy saw blade change | .0156 Accuracy on cross cut | Spring hold downs |
| Carbide Tipped 20 tooth blade | Can use router in same carriage | Knife Cutter |
| 10' steel powder coated frame | Bevel Cut to 45 degrees | Laser Pointer |
| Nickle Chrome 1/8" wall steel guide tubes, 1.75" OD | 2 carriage locks ensures no play when ripping | Frame Dust Collection |
| Detachable tool plate | Score cut, vary depth of cut | 60 tooth carbid tipped aluminum blade 60 tooth carbid tipped plastics blade 40 tooth carbid tipped wood blade |
| 18 Injected Molded plastic maertial rollers with steel hubs | Able to view saw blade and mark on material for cut alignment | Spinning saw insert |
| Spring loaded counter balance | 18 material support rollers, most in class | |
| Saw cord holder | 1 simple squaring adjustment that locks in place, (rollers don't adjust), doesn't go out of square, factory aligned | |
| 2 carriage locks | Uses 7.25 saw blades found everywhere | |
| Dust hose channel | 1.75" depth of cut | |
| Folding stand with wheels for frame | off the shelf saw | |
| stop, strip bar and left / right tapes | Easy tool insert changes | |
| Dual rip pointers |
|
|
| Accu-Square alignment System | ||
| Accu-Glide Steel Sealed Bearings |
|
Saw Trax |
Competition |
|
1052 |
H-4 |
Bearings on Carriage |
Steel Sealed Bearings, 12 per carriage Tighter tolerances, easier movement |
U-Bolt with nylon washers, 4 per carriage |
Alignment System |
Patented Accu-Square System |
No Alignment System |
Saw Replacement |
Off the Shelf |
Proprietary - Must be |
Carriage Locks |
2 |
1 - Not as secure as 2 when rip cutting |
Shipping |
Crated |
Limited protective packaging, |
Instructions |
Instructional CD Video plays in computer and Manual |
Manual only |
Router Capable |
Floating Router Insert Available |
NO |
Razor Knife Capable |
Razor Knife Insert Available |
NO |
Guide Tubes |
Nickel Chromed |
Zinc |
Retraction Cable |
Off-set |
Can pull when feeding |
Blade Change |
Less than a minute |
Take saw apart |
Material Rollers |
18 |
14 |
Cross & Rip Cut |
52” Cross Cut/Unlimited Rip |
50” Cross Cut/Unlimited Rip |
Blade |
7 ¼” - Found Everywhere |
8 ” - Hard to find |
Depth of Cut |
1.75” |
1.75 |
Saw |
15 Amp Porter Cable |
15 Amp Milwaukee |
Warranty |
3 year excluding saw |
1 year excluding saw |
Standard Package |
$2699.00 |
$2229.00 |
Folding Stand |
Folds like a ladder Takes one person to move, Attached at factory |
$109 Fixed, User Attaches |
Optional Wheels |
5” Included on 1000 Series |
4” $50.00 |
Dust Brush |
Included on 1000 Series |
Not Available |
Stop Bar & Tapes |
Use on either side, Included in Package |
$239.00 |
Dual Rip Gauge |
Included on 1000 Series |
Standard |
Saw Blade |
Standard, 20 Tooth Carbide |
Not Included ($139 for 48 tooth) |
Dust Collection |
Standard |
Dust Kit Only |
Total |
$2699.00* |
$2856.00* |
| *Pricing updated | 11/20/08 |
Customer email 12/18/08, Purchased a 1064
On this first anniversary of ownership of a SawTrax panel saw,
I write to thank you for a wonderful product. It has saved this
66 year old body and made it possible for me to run full sheets of material without having to callfor help. Thank you. I hope you
continue to be successful.
Tad Hess
Spanish Fork UT