Click on the above pictures to link to a
comparison chart.

Full Size 100 is available with 100 inch cross cut capability.  This is ideal for the plastics industry.  Tolerance is approx. + or - 1/16.  Click on picture for more information.

Accu-Glide Sealed Bearing System
3 hp, 15 amp. Saw Motor
Dust Port hook up with hose
Dust brush under saw insert
Blade Lock for easy saw blade changes
Carbide Tipped saw blade
Steel Frame, Powder Coat Finish
Nickel Chrome 1/8" Wall 1 ¾" Steel Guide Tubes
Detachable Tool Insert
18 Injected Molded Plastic Material Rollers
Spring Loaded Saw Counter Balance
Saw Cord Holder
2 Carriage Locks
Dust Hose Channel
Accu-Square™ Alignment System
Stop, Bar & Tape
Folding Stand with Wheels
Dual Rip Gauges
Carbide Tipped saw blade
Wheels for frame

"Full Size" Frames feature a standard 10' wide welded steel frame. They are ideal for ripping sheets on a regular basis.

The Full Size frames are the industry's standard size for handling 8' wide sheets.  This frame will fully support a sheet while cross cutting  6 " off one end, or ripping the full sheet.  The Full Size 52 , Full Size 64 and Full Size 76 have fully welded steel frames. The Full Size 88 and 100 frames are 2 piece for shipping purposes.

Packages vary with the saw and the  accessories.

Sign Makers package uses a  Porter Cable 15 amp saw with a 7.25" blade

1000 Series  Package uses a Porter Cable 15 amp saw with a 7.25" blade

2000 Series Package uses a Bosch Worm Drive 15 amp saw with a 7.25" blade

3000 Series Package uses a Milwaukee 15 amp 10" saw with a 10" or 10.25" blade

Recommendations:
If cutting over 50 sheet per week, plastics .5" or thicker or hard woods go with 2000 series

If cutting material over 1.5", Melamine or you want to use your 10" saw blades, go with 3000 series

1-888-SAW-TRAX        1-888-729-8729     (770) 974-0021     FAX (770) 975-1618       info@sawtrax.com